Frigidaire Washer — Error Code E11

Q: How do I fix the E11 error on a Frigidaire washer?

Try first: Restore the incoming water flow. Open both supply valves fully, straighten kinked inlet hoses, clean the inlet screens, verify household pressure, then power-cycle for one minute and retry.

The fill time is too long.

brand Frigidaire appliance Washer market US component water inlet valve category water_supply severity stop failure

Ranked repair steps

1. Restore the incoming water flow

Open both supply valves fully, straighten kinked inlet hoses, clean the inlet screens, verify household pressure, then power-cycle for one minute and retry.

easy · basis: cost ascending

2. Replace the inlet valve

If fills stay slow, replace the water inlet valve assembly and check the pressure switch and its hose.

advanced · basis: cost ascending

Educational reference, not a substitute for the manufacturer's service manual. Disconnect power and water before servicing; gas, sealed-refrigerant, and high-voltage work is for qualified technicians only.

Provenance: facts re-derived from an disclosed repair reference — ApplianceAid — Frigidaire Front-Load Washer Fault Codes. Meanings and steps are original paraphrase; nothing is reproduced verbatim.

Need this as data? This page renders one row of the ApplianceDB dataset — 438 codes, ranked fixes, OEM parts with observed costs, per-row provenance. Get the free sample →