Hoover Washer — Error Code E02 (UK)

Q: How do I fix the E02 error on a Hoover washer?

Try first: Restore the water supply. Confirm the supply is on with sufficient pressure, straighten the fill hose, verify flow into a bucket, and clean the inlet filters.

The machine is not filling within the expected time.

brand Hoover appliance Washer market UK component water inlet valve category water_supply severity stop failure

Ranked repair steps

1. Restore the water supply

Confirm the supply is on with sufficient pressure, straighten the fill hose, verify flow into a bucket, and clean the inlet filters.

easy · basis: cost ascending

2. Replace the inlet valve

If filling still fails, have the inlet valve coil resistance tested and the valve replaced if open-circuit or stuck; check the pressure switch and board inputs next.

professional only · basis: cost ascending

Educational reference, not a substitute for the manufacturer's service manual. Disconnect power and water before servicing; gas, sealed-refrigerant, and high-voltage work is for qualified technicians only.

Provenance: facts re-derived from an disclosed repair reference — Whitegoods Help — Hoover Washing Machine Error Codes. Meanings and steps are original paraphrase; nothing is reproduced verbatim.

Need this as data? This page renders one row of the ApplianceDB dataset — 438 codes, ranked fixes, OEM parts with observed costs, per-row provenance. Get the free sample →